ENABLING A NEW GENERATION OF SPACE 서닉 카지노S

Today’s designers of space-based 서닉 카지노s are borrowing a page from astronomy’s pioneers by returning to the use of metal mirrors. In 1668, Sir Isaac Newton used “speculum metal” to craft the mirror for the very first reflecting 서닉 카지노 ever made. Speculum is a copper-tin alloy that remained the 서닉 카지노 mirror material of choice until the mid-1800s. Then, technological advances caused a shift to glass mirrors which delivered better results.

Back to the Future with Metal 서닉 카지노s

So why turn the clock back to metal mirrors now? First because we’re not using speculum metal mirrors, which were hard to make and quickly tarnished. Today’s advanced spaceborne 서닉 카지노 mirrors are made from modern alloys of aluminum and beryllium, as well as composite materials, like silicon carbide (SiC).

A primary advantage of using these materials is that both the mirror and its mount (the mechanical structure that holds the mirror) can be produced as a single, monolithic structure. This isn’t practical with glass. Monolithic construction can dramatically reduce the part count and overall 서닉 카지노 weight, simplify and speed the assembly process, and, as a result, lower the cost.

A monolithic metal 서닉 카지노 integrates the optical component with its mounting hardware.

Material Differences

While metal mirrors clearly offer substantial practical advantages, they’re not the “best” material for every application. This is especially true when considering the thermal characteristics of the 서닉 카지노. This is a major consideration in spaceborne system design because the space environment exposes craft to temperature extremes and rapid temperature cycling. To explore this further, it’s useful to review some of the key properties of the materials most commonly used for spaceborne 서닉 카지노 primary mirrors.

^{ZERODUR® is a registered trademark of Schott AG}

Fused silica and Zerodur are just two of several “glasses” used for 서닉 카지노 substrates, but they represent that class of materials well. Their defining characteristic is an extremely low coefficient of thermal expansion (CTE). This simply means these materials don’t expand or contract much with temperature changes.

Glasses also have low thermal 서닉 카지노nductivity. As a result, it takes a long time for them to either heat up or 서닉 카지노ol off in response to changes in ambient temperature. This keeps them stable when temperature changes.

In 서닉 카지노ntrast, aluminum rapidly changes shape with temperature and also 서닉 카지노nducts heat well. It offers the practical advantages of being inexpensive and readily obtainable, and it can be quickly made into finished parts.

Beryllium is a bit of a “magical” material. It is less dense than glass but much stiffer. This makes it possible to fabricate thin, lightweight components from it that are still mechanically strong. Plus, at temperatures below about -130°C, beryllium changes crystalline form, and its thermal expansion coefficient becomes quite small. This combination of characteristics makes it the most lightweight, structurally strong, and thermally stable material available. That’s why it is used for the most demanding applications, like the primary mirror segments of the James Webb Space 서닉 카지노.

The negative of beryllium is that it’s rare and extremely expensive. Plus, it’s quite toxic so workers must take extreme precautions when processing it.

SiC has a higher density than any of these other materials. But that doesn’t mean that SiC 서닉 카지노s can’t be made lightweight. This is because SiC is very stiff. As a result, SiC 서닉 카지노s and structures can be made much thinner than with other materials, yet still remain quite strong and stable.

Together, these properties make glasses preferrable when the 서닉 카지노 is expected to experience large temperature gradients. This happens when one part of the 서닉 카지노 is in sunlight, which heats it up, while another part is in shadow. The shadowed part gets cold because its heat radiates away into space. The low CTE and thermal conductivity of glasses means the mirror won’t rapidly change shape in response to a temperature gradient.

In contrast, when temperatures are expected to be uniform across the structure, it’s advantageous to make both 서닉 카지노 and mount from a metal or composite. Their efficient heat dissipation enables such a system to reach equilibrium more quickly, reducing the impact of transient temperature changes.

Plus, when temperature does change, using the same material for both mirror and mount eliminates any difference in how they respond (even if they are separate pieces). This is important because differential expansion between the mirror and mount can throw a 서닉 카지노 out of focus. It can also put stress on the mirror and distort its surface shape which reduces image quality. Designers of glass mirror 서닉 카지노s often create structures that minimize this effect, but this adds cost and sometimes weight.

Glass Has a Clear Advantage

In terms of optical fabrication, glass has long had one other important advantage over other materials. It can be shaped and polished to an extraordinarily high degree of precision. And it has been possible to make optics with this high precision for over a century–long before 서닉 카지노mputers and lasers became available.

To understand exactly what “precision” means for 서닉 카지노 mirrors, it’s necessary to know a little bit about how optical surfaces are specified. There are essentially two separate domains of concern.

One way to quantify the shape of a 서닉 카지노 mirror is to measure its “power” (the amount by which its overall shape departs from the desired curve), its “irregularity” (the smaller scale bumps and ripples in the surface), and its “surface roughness” (the height variations on a microscopic scale).

The first is the overall shape, usually termed “figure” or “surface accuracy.” Specifically, this is how well the surface shape (curvature) of the 서닉 카지노 surface matches the design form.

For optimum image quality, the surface shape should match the intended value to within 150 nm or better (a nanometer is one billionth of a meter). It’s not at all unusual for the surface accuracy specification on a 서닉 카지노 mirror to be 60 nm.

The second area of concern is surface roughness on the microscopic scale. A 서닉 카지노 mirror must be extraordinarily smooth in order to minimize the amount of light it scatters. Scattered light lowers image brightness and contrast.

To form high-quality, visible wavelength images, a 서닉 카지노 mirror should have a maximum surface roughness of a few tens of Angstroms. An Angstrom is one ten-billionth of a meter. It’s about the diameter of a hydrogen atom.

In the past, it wasn’t possible to polish metal 서닉 카지노s with either the shape accuracy or smoothness (low surface roughness) achievable with glass 서닉 카지노s. To reduce metal 서닉 카지노 surface roughness, a thick layer (tens of microns) of metal was plated over the 서닉 카지노 to smooth it out.

For aluminum 서닉 카지노s, it has been standard practice to use nickel as this plating material. But the CTE of nickel is different than aluminum. Differential expansion or contraction between the coating and 서닉 카지노 substrate can subsequently warp the 서닉 카지노 out of shape, reducing imaging quality. This has been a limiting factor in the deployment of aluminum 서닉 카지노s.

Improving Metal Polishing Technology

서닉 카지노 has been working to improve optical polishing technology for many years. We have developed our own, proprietary computer-controlled optical surfacing (CCOS) method and made major investments in advanced metrology equipment.

This enables us to polish metal 서닉 카지노s with a shape accuracy that rivals that of glass optics. We reached this milestone some time ago, but our capabilities here still remain unique in the optics industry.

More recently, we’ve further refined our process to dramatically lower the surface roughness we get on metal 서닉 카지노s. Now we can produce a surface smooth enough to be used as a 서닉 카지노 without any coating. But more commonly a thin layer (much less than one micron) of metal or dielectric material is applied to enhance the reflectivity. Gold is one commonly used coating material. Most importantly, these layers are thin enough to eliminate any issues related to a mismatch in CTE between the coating and 서닉 카지노 substrate.

The new generation of high-precision metal and composite mirrors possible with our technology makes these materials more viable and expands the 서닉 카지노 designer’s toolkit. Aluminum, in particular, becomes a more attractive option. It can reduce the cost and launch weight of optics without sacrificing image quality. And aluminum mirrors can usually be produced much faster than other materials which makes it easier to meet production schedules.

Learn more aboutCoherent custom 서닉 카지노 opticsfor 서닉 카지노 and terrestrial applications.

Related Resources